The tenant withdrew the rent and started the work of tidying up the house again. Many people think that being a landlord is great, but it is not. In order to save costs, many things must be done by yourself.

房客退租了，再度的開始了整理房子的工作。很多人以為當房東很爽，其實並不然，為了節省成本，很多事情都必須自己DIY。

Today I want to introduce to you the replacement of the push-type drain plug. In the picture, the drain plug has been lost. A hole may feel nothing, but it is easy to fall into the sundries. Coco once found all kinds of bottle caps, ball pens, and unknown slag in the drainage pipe.

今天要跟大家介紹的是按壓式落水塞更換。圖片中，落水塞頭已經遺失，一個洞或許感覺沒什麼，可是很容易掉進雜物，，可可曾在排水彎管中發現過各式的瓶蓋、原子筆、不明的渣渣…。

The first is the purchase of downspouts. Common parts are available on the Internet and hardware stores. There are complete sets or individual parts. What you don’t know should be its name. The name on the bag is “bath rack set You can try to search for it. In addition, please measure the length of the drainage elbow under the washbasin first. Cocoa just doesn’t know the length before buying one long and one short for luck.

首先是落水管的購買，很常見的零件，網路上、五金行都能買到，有整套組的，或單獨零件的，大家不知道的應該是它的名稱，袋上名稱是「面盆排桿組」各位可以嘗試著搜尋看看，另外，請先量好臉盆底下排水彎管的長度，可可就是不知道長度，才各買一長一短賭運氣。

First remove the cover under the washbasin. The screw holes are on the left and right sides of the cover. Due to the age and the humid environment in the bathroom, many screws should also rust. It is recommended to replace them with new materials so that they will not be repeated in one place. repair.

先卸下臉盆底下的罩子，螺絲孔在罩子的左右兩邊，由於年代久遠，加上浴室潮濕的環境，許多螺絲應該也生鏽，建議一併的換新材料，才不會一個位置重複地修理。

Rusting of the tie rod is a common problem, because we want to change the straight pipe under the washbasin, so we must first remove the elbow, try to rotate the two turntables below, the turntable is sometimes caused by long-term water Rust stuck, try a few more times, you should be able to remove it.

排拉桿生鏽是常見的問題，因為我們要換的是臉盆下直管，所以我們必須先卸下彎管的地方，試著旋轉下方前後兩個轉盤，轉盤有時會因為長時間的水銹卡死，多試試幾次，應該都能拆下。

Remove the falling water pipe. The way to remove it is to fix the flat piece (upper object) on the washbasin with a screwdriver or clip. Rotate the lower downpipe (lower object). The upper flat piece must be fixed, otherwise it is easy to both Rotate at the same time.

拆下落水管，拆下的方式是將臉盆上的扁片(上方物件)用螺絲起子或夾子固定，在旋轉下方落水管(下方物件)，上方的扁片一定要固定住，不然很容易兩者同時旋轉。

Reinstall the downpipe in the same way. Does it feel like new? I feel better after seeing good things and putting them back.

以相同的方式，將落水管裝回去。有沒有感覺像新的一樣，看到好東西裝回去心情一整個就好了起來。

For the joint of the tie rod, remember that the screw head should face outwards. If it faces inward, it is not easy to construct, and there is also the problem of loose locking and loosening. In order to prevent repeated construction, be a small warning.

拉桿的接頭，記得螺絲頭要朝外，朝內話除了不好施工，還有鎖不緊鬆脫的問題，為了預防不要重複施工，做個小叮嚀。

Boiling water test to see where the water is leaking and where it is not smooth, and make a detailed adjustment. Just locate it once, don’t disassemble it in the future.

開水測試，看看哪裡在漏水的，哪裡不順暢的，在做一次細部的調整。要做就一次把它做定位，不要日後拆拆裝裝的。

After putting the base back in, everything is done. After the calculation, the repair cost is about 300 yuan for parts. It took a little time and saved money. After all, now the landlord is really difficult to do. Right. END

把底座裝回去後，一切就大功告成，算一算，這個維修，零件錢大約300元左右，花了一點時間，省下了工錢，畢竟，現在房東真的不好做，該自己來就自己來吧。END